Underwater Industry Frequently Asked Questions (FAQ)
Main  
Main Articles
Has there been any discussion over the effects of seismic airguns on divers? What is it like to be diving while a survey is taking place in the vicinity. I see that 1500m is considered a safe distance away from the survey for diving to take place. Has any one any comments or experience to share?
Treat any seismic airgun as an explosive device (it is - but it uses air to cause the "explosive" wave needed in seismic surveys.) Maybe there are others reading...
Last Modified: 2007-02-06 Number of views: 344
having completed course, ultimate diver training at the ocean inst. in houston, certification is only good for the u.s. how do I now get canadian and international certification......
Contact the Diver Certification Board in Canada to review your qualifications and advise you as to what would be needed to get their certification or recognition of your...
Last Modified: 2007-02-06 Number of views: 403
How do I find out about underwater welding jobs in Canada?
Contact the dive companies in Canada (or worldwide.). CADC has a membship list at http://www.cadc.ca Check it out for job openings. Also make sure your resume is on...
Last Modified: 2007-02-20 Number of views: 757
How much can a underwater welder make,and how is job placement after graduation.
An underwater welder - depending on which area in the world he is working - will usually be paid his dive rate plus a bonus rate for his ability to do various types of...
Last Modified: 2005-03-27 Number of views: 4392
How much do divers make?
It depends on the area you are working in and the job that you are doing. Inland divers (Canada) make around $20 =/- $10 per hour. Offshore rates vary depending on what you...
Last Modified: 2007-02-06 Number of views: 1371
I am interested in working towards becoming a commerical diver, but don't know if I'll like it. How do you know if you'll like the job or not? Thanks.
The best way to find out if you'll like it is to talk to those involved in the industry. Commercial diving is not for everyone. Although it is an exciting lifestyle, the...
Last Modified: 2007-06-21 Number of views: 401
I have the 2 class diver SCUBA & SURFACE Supplied to 40m. If I need work for example Canada what naval qualifications are need to get a job?
To work in Canada, you must have experience or training to be considered for work. Having  Diver Certificatin Board of Canada recogntion of your skills will go a long...
Last Modified: 2007-06-21 Number of views: 352
I need a list of some the commercial Diving school in Canada. Thank you.
For a list of commercial schools in Canada, do a google search on dive schools in Canada. A couple of them are: -Canadian Working Divers  (Ontario) -Seneca College...
Last Modified: 2007-02-06 Number of views: 506
What are the injury and death rates of commercial divers? Specifically underwater welders.
Well, it depends on which part of the world you are working. Diving has become a LOT safer over the last 20 years with increased training and good people. If you are...
Last Modified: 2007-02-06 Number of views: 690
What is saturation diving?
Saturation diving is a diving technique that allow divers to remain at great depth for long periods of time, by living under pressure in special living chamber complexes...
Last Modified: 2007-02-07 Number of views: 486
what kind of benefits and insurance do underwater welders get?
It all depends on the company you are working for. Each company will have different rates for each catagory. (Areas will differ also.)
Last Modified: 2007-02-06 Number of views: 572
Whats an expected pay range for a beginner welding in the gulf of mexico
Contact some of the companies in the Gulf area. (see company listings of US companies at http://adc-USA.org   . They will give you current rates.
Last Modified: 2007-02-06 Number of views: 769
When a person quits and is re-hired do they keep their senority.
This would only happen if you were in a union shop or by prior arrangement. Good divers are hard to find - so you may move from company to company and IF you remain...
Last Modified: 2007-02-06 Number of views: 408


UnderwaterINDUSTRY Questions in General. (6)
Questions and answers about working in the Industry.
UnderwaterJOBS: Questions and Answers (2)
Questions about how to effectively use the UnderwaterJOBS website. Get the job you are looking for - or get the people you need.
Associations and Organizations (2)
Underwater Industry Associations
Regulations and Standards and the Law (11)
This is where FAQs on regulatons, standards and the law are presented.
       


Most Viewed Articles
How much can a underwater welder make,and how is job placement after graduation.
An underwater welder - depending on which area in the world he is working - will usually be paid his dive rate plus a bonus rate for his ability to do various types of...
How much does a commercial diver get paid?
It just depends which part of the world and which part of the Industry you are in (inshore construction, offshore construction, oil industry, rov, etc.). The best way...
How much do divers make?
It depends on the area you are working in and the job that you are doing. Inland divers (Canada) make around $20 =/- $10 per hour. Offshore rates vary depending on what you...
How do I find work in the Diving Industry?
You are going to have to persevere and keep at it. In the diving industry, you can\'t get into the water and come back up and say you can\'t do it - the reality is that...
How does one join the CADC?
The CADC MISSION STATEMENT is: " The Canadian Association of Diving Contractors ( CADC ) will represent it’s members common interests with regards to safety and...
What is CADC all about and why should our company join?
As CADC grows across Canada we need to look closely at our role in the industry to insure that we have a distinct advantage over non-member companies. It is not enough to...
Do I have to pay $650 to get certificates as supervisor of SCUBA and Surface Supplied?
I currently hold a Permanent Category I Diver certificate and a Diving Supervisor certificate with the National Energy Board, the Canada - Nova Scotia Offshore...
Whats an expected pay range for a beginner welding in the gulf of mexico
Contact some of the companies in the Gulf area. (see company listings of US companies at http://adc-USA.org   . They will give you current rates.
How do I find out about underwater welding jobs in Canada?
Contact the dive companies in Canada (or worldwide.). CADC has a membship list at http://www.cadc.ca Check it out for job openings. Also make sure your resume is on...
Do you require that I redo all the hours of experience that I sent with my original application to the NEB?
I have been diving steadily since 1979 and have currently Category 1 Diver and Category 1 Air Supervisor from the NEB. They are to expire July 15, 2003. Do you...
Most Recent Articles
Search Glossary Saved Article Contact us Export PDF Export HTML